Saturday, August 11, 2007

Alarums in the Night, and Other Projects

The new boat's been a whirlwind of work. Work's been a whirlwind of work. Selling my house and moving to the boat has been, well, a whirlwind of work. At least that's my excuse for not writing more sooner.

Where to start? I've moved to the boat. And closed on my house so I have money, which of course, will be put partially into the boat. I can't think of anything as satisfying as spending money on the boat. Especially big ticket items that I had already budgeted for. I know there's the whole boat-budget dichotomy, perhaps an oxymoron.

In any case, the current projects are installing the autopilot, chart plotter and instruments. But there's a roundabout story how that's all coming about.

Last weekend I decided to go sailing. I left City Island to meet friends in Cold Spring Harbor - a lovely anchorage that is only exposed directly to the north. Clean and quiet it is the site of the former Louis Comfort Tiffany artist colony/estate. I got to be the mother ship with my friend Lou and guests rafting up.

It was really cool to drop the big 60 lb anchor with the chain and just stick there. Anchoring on the north shore of Long Island is almost universally easy. Pretty much any anchor will hold. But letting go of all that chain! It's a special sound. A manly sound for a manly boat! Arrggh, matey!

Ok, the evening progressed more or less as you might expect with much food, G&T's, wine and good company. It was a murderously hot day, and we spent a good deal of it in the water. The evening cooled down very nicely. Just the way I like it.

Anyway, the next morning the wind was up so taking one of Lou's crew, Andy, we sailed off back to City Island. As is always the case on the Sound, about 10am the wind died. So I started the engine and Andy and I motored back. Just at the southern tip of City Island (within site of my mooring), the engine died. No wind, no engine. No current, thankfully, but we weren't going anywhere.

Just at the point of deciding to get towed in, a small 3-5 knot breeze came up and we were off! Slowly at first, and then more slowly. Two hours later we were almost to the mooring when the wind changed direction requiring some fast thinking by the launch operator. Let's just say my judgment is better now.

Now, when the engine stalled, I drained and cleaned the Racor fuel bowl. But after that no fuel would come in. That's a problem. What could it be? The fuel was old, and the goop that had been in the fuel could have been the culprit. That means 65 gallons of contaminated fuel to get rid of. Or, the tank, despite showing 3/4 full on the meter, could be empty. Lou lent me 5 gallons of fuel and after spilling a fair portion of it, at least 4 got into the tank, but still no joy.

That means the tank is full of junk and I have a big problem. Well, a great deal of wailing and gnashing of teeth, I found a yard that will, 1. haul me, and 2. let me dispose of the fuel. Kudos to them. A smack in the teeth to the yards I contacted that would only haul on the condition I let them work on my boat. You yards know who you are. Shame on you.

So Laura's husband, Cory, popped down Monday to help me rig a gerry can to the engine so I could get somewhere - most notably to the yard, and allow me to charge the batteries. Living on the mooring is fraught with issues, eh?

We started at the racor and worked our way back to the fuel tank to see where the line was plugged. Someone had installed a lift pump in the racor suction so that you could dispense with bleeding the engine when you change the racor. Well, a pump with no inlet filter is asking for trouble, especially where fuel with stuff in it is concerned. And that was the culprit. The pump was jammed.

This brings up another issue. If, for some reason you start wiring with a particular color wire, get enough to do the whole job. This pump had a purple wire connected to it. Fine. Run it all the way to the power source. Somewhere in a conduit, it changed color to red, and then went to the engine control panel. How stupid is that? Fortunately I've dug around in the wiring enough to notice there was extra wires on the panel. This was one of them.

Anyway, problem solved. Engine runs. All is good with the world. In the meantime, I ordered a Honda EU2000i generator from Wise Sales who were very nice, competitive and shipped that day - I got the generator Thursday after ordering it Tuesday. Marvelous! Even though I didn't need it, I had to try it out.

First, it comes without oil, as you'd expect. The oil fill is the most ridiculous design possible. You have to lay the generator on its side to fill the oil. It takes .4 quart. Can you measure .4 quarts? I thought not. The way you know it's full is to stand it up and see if it runs out the fill. When it stops running out, it's perfect.

What does that mean? It means you're going to get oil all over the place. Why not use a funnel? Because the fill is not vertical - it's nearly horizontal. Not the best design.

Remember I mentioned most of Lou's fuel got into the fuel tank? Well, if you haven't bought a fuel can recently, you can't without device that prevents it from leaking or spilling when the can is tilted. All fine and good except it's quite possibly the worst design I could imagine -you have to hook the filler on the device to be filled and press down on it to open the valve. This virtually guarantees you'll spill the fuel. In an effort to save the environment, the designers have made sure you're going to spill. It's the stupidest thing I've seen all week. A smack in the teeth to whoever thought it would be a good idea.

But once oiled (and cleaned up after), and fueled (and cleaned up after), it runs like a top! It's quiet, and man, oh man, it charges the batteries, runs the AC loads except the water heater, and what fun! I'm ticked pink. But with electricity. It's the generator of choice for cruisers without shipboard mounted diesel generators.

I still want a wind generator... But that's next year.

Today's project is to put LEDs on the 12v power panel so you can see at a glance what's on. When my panel was made 30 years ago, LEDs were very expensive. Now from Plasma LEDs you can get a whole bag of them for $50.00. Panel before LED installation
Working on adding leds
Panel with LEDs lit
They're simple to put in - drill a hole with a #3 drill, stick the LED in the hole from the back and using silicone or crazy glue stick the LED to the panel back. Connect the red wire to the LOAD side of the breaker or switch and the black wire to a ground, and hey! presto! a circuit monitor light. Cheap, easy, and quick. Pictures to follow on an edit as I'm still waiting for the silicone to set.

A final note on the results - perhaps you don't need the brightest LEDs available. At night they light up the aft cabin pretty well, especially if you have four or more circuits on....

This is one of the very few uses for silicone sealant on board a boat. Using it as a sealant virtually guarantees a leak and worst, also guarantees that the next adhesive you use to fix the problem won't adhere without some serious work. It's bad mojo all the way around. The only other use I can think of is to put a dab on cotter pins on the standing rigging so you don't have to bend them around in circles and they are easy to remove. But that's it.

Monday is the haul out, and the start of the new instrumentation.

The last week of August is the start of my cruise, and I will definitely see you on the water!

1 comment:

Foxxen said...

I hope you do not mind me posting.

I have just finished my first advice website on How to Buy a Generator called
www.whatgenerator.com and thought your website vistitors might find the information useful.

I have spent 5 years in the generator industry, and have in-depth knowledge which I would like to pass on.

Free Advice on Buying A Generator

www.whatgenerator.com

Best regards,

S Beagley
www.Whatgenerator.com

http://www.whatgenerator.com